Analytica GmbH AnaGate CAN duo User Manual download pdf (Page 11)

Chapter 2. Configuration

2.1. Initial installation

First the AnaGate CAN Gateway must be supplied via the power plug with a tension from 9 to 24 V.

Insert the included LAN cable into the plug labelled LAN and connect it either to a hub or switch. If

connecting to a PC use a crossover LAN cable (not in scope of delivery) instead of the included LAN cable.

The AnaGate CAN Gateway is delivered with the following initial network settings:

IP address 192.168.1.254

Address type static

Network mask 255.255.255.0

Gateway 192.168.1.1

The device can now be configured using a standard browser (Internet Explorer, Firefox, etc.) by using

http://192.168.1.254.

Figure 2.1. HTTP interface, AnaGate CAN uno

Note

The PC used for the configuration must be in the 192.168.1.x network. The static

IP address 192.168.1.2 with the subnet mask 255.255.255.0 can be e.g. used. If

neccessary the settings of the network interface on the configuration pc has to be changed

temporarily.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Analytica GmbH AnaGate CAN duo User Manual Page 11